Exhaust Systems
When the time comes to replace the standard pipes, there's no shortage of choices for replacement. Many of the aftermarket systems are works of art, in polished aluminium, stainless steel, ceramic, chromed steel or carbon fibre.
There are a number of ways to go, not all leading to the same destination. For example replacing the OEM system with, say one of the Motad Neta systems, will result in a bike with roughly similar performance as before, comparable looks and similar noise levels.
However, install say a 4 into 1 Remus system, with carbon race can and you're in a whole different ball game.
When my system expired I chose a Renegade stainless steel 4 into 1, with race can. I think more than any other item, it changed the characteristics of my FJ. It leaves a void on the left hand side, which takes some getting used to. This said I'd never go back to a standard type system and the noise, well it's music as far as I'm concerned but the neighbours and the plod (police) may have another opinion.
I've included some popular systems I can think of, from boths sides of the Atlantic. Obviously I have only personal experience of a few, your comments would be very welcome, so they can be included at the next update. ( * Denotes not street legal in the UK )
|
Make |
Type |
Bottom End |
Top End |
Oil Plug Access |
Retain Centre Stand |
Noise Level |
Quality |
Picture |
|
4 -1 Stainless |
Slight drop |
Good increase |
Good |
Yes |
Deep growl |
Good |
| |
|
? |
? |
? |
No access. |
? |
? |
Reported poor. | ||
|
4 -1 |
Tune to taste ! |
Tune to taste ! |
No problems |
Yes |
Exhaust is tuneable, so noise varies. |
Excellent |
| |
|
Zyclone 4 -1 |
Poor |
Very good. |
Very tricky. |
Yes |
Pretty loud. |
Reports of bad quality. |
Picture needed. | |
|
4 -2 |
Similar to Standard |
Similar to Standard |
Yes |
Yes |
Quiet |
Can rust quickly |
| |
|
|
4 -1 |
Similar to Standard |
Similar to Standard |
Nope! It's got to come off !! |
No problems |
Quiet |
Reports of bad finish. Needs maintenance. |
|
|
|
4 -1 Stainless Oval Can 4-1 Carbon Oval Can 4-1 Carbon Round Can |
? |
? |
? |
? |
? |
Good quality reports. |
|
|
? |
? |
? |
? |
? |
? |
Can rust quickly |
| |
|
Ali Slip-ons |
Slight drop |
Good increase |
As standard |
Yes |
Louder/Deep tones |
Good |
| |
|
4 -1 Steel |
Slight drop |
Increase |
Tight squeeze |
Yes |
Loud Bark |
Reports of mixed build quality. |
| |
|
|
4-1 Carbon Can |
Same as OEM |
Same as OEM |
No Access |
? |
Deep growl |
Good quality reported. |
|
|
4 - 1 Alloy |
Reported good. |
Reported good. |
Difficult but possible. |
Yes |
Deep growl. |
Believed good. |
|